Static/Dynamic
| Input Range (°) | ±1.0 | ±3.0 | ±14.5 | ±30.0 | ±60.0 |
|---|---|---|---|---|---|
| Non-linearity (%FRO max)2 | 0.02 | 0.015 | 0.02 | 0.02 | 0.03 |
| Scale Factor Tolerance (% maximum) | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
| Scale Factor Temperature Sensitivity (PPM/°C maximum) | 100 | 100 | 100 | 100 | 100 |
| Output at 0° Tilt (° max) | ±0.01 | ±0.01 | ±0.05 | ±0.05 | ±0.05 |
| 0° Output Temperature Sensitivity (°/°C, maximum) | 0.005 | 0.005 | 0.005 | 0.005 | 0.005 |
| Bandwidth (-3dB, Hz, nominal)3 | 3 | 6 | 30 | 30 | 30 |
| Transverse Axis Misalignment (° maximum) | 0.15 | 0.15 | 0.5 | 0.5 | 0.5 |
| Resolution & Threshold (° maximum) | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| Power on Repeatability (° maximum) | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| Repeatability (° maximum) | 0.001 | 0.001 | 0.002 | 0.002 | 0.003 |
Electrical
| Number of Axes | 1 or 2 |
| Supply Voltage Range (VDC) | 36 to 57 |
| Startup Voltage (VDC, Minimum) | 42 |
| Noise (millidegrees rms, maximum) | 2 |
| Input Current (mA, maximum) | 250 |
| Input to Output Isolation (Vspeak Impulse) | 1500 |
Environmental
| Operating Temperature Range | -40°C to +85°C |
| Storage Temperature Range | -40°C to +85°C |
| Vibration (grms) | 20 |
| Shock | 1500g, 1 msec, ½ sine |
Enclosure
| Housing Material | Anodized & Alodine Aluminum |
| Protection Class (per IEC 529) | IP65 |
| NEMA Enclosure Rating | 6 |
| Seal | MIL-STD-202, Method 112 |
| Connector Type | Amphenol RJF72B00 |
| Recommended Mating Connector | Amphenol RJF6B |
Digital Output
| Interface | Ethernet 10Base-T or 100Base-TX (Auto-sensing) |
| Protocol | TCP/IP, UPD/IP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, AutoIP, and HTTP |
| Output Rep | Degrees |
Notes:
1: Full range is defined as “from negative full input angle to positive full input angle”
2: Non-linearity is specified as deviation of output referenced to a best fit straight line, independent of misalignment.
3: In default condition without averaging enabled
