INTEGRATION
|
FEATURES
|
| SPECIFICATIONS | |
| Power Supply: 12-28VDC max., 300mA.Non-linearity: <0.0015% FSOTemperature Coefficient: <2 ppm/ºCLoad Cell Excitation: 5V, 120mA max. (up to 8x 350Ω or 16x 700Ω load cells, 4 or 6 wire)Input range: 0mV to +18mV (weighing).-18mV to +18mV (bidirectional force) Minimum 0.1 μV/divisionZero Adjustment Range: -18mV to +18mVConversion Rate: Up to 1600 times per secondUnits: g, kg, t, lb, klb, N, kNResolution: Max. Displayed 999999, internal 16000000, 24 bit Delta Sigma ADCDisplay: 6 digits, 7 segments red LED, 13.5 mm highDisplay Annunciators: Gross, net, motion, centre of zero, unitsKeypad: 5 key (user assignable Function, G/N, Tare/Clear, Zero, Print) with lockOperating Environment: -15ºC to +55ºC; max. 85% RH, non-condensing. IP67 with front panel sealing.Enclosure and Dimensions: Stainless steel front panel, aluminium casing, stainless rear. 100mm x 55mm panel, 100mm deep. 1/8DIN cutout.Calibration: Span calibration with weights, even without without zero calibration. vCal for calibration by direct entry of load cell characteristics. Calibration of span and zero by fieldbus commands. | Weighing Functions: Tare, zeroing, auto zero track, motion detection, auto-zero at power up, peak hold, hold.Digital Filter: Adaptable filter adjustable in 10 steps.Other Functions: Pre-settable label (print ticket) count number, gross or tare indication.Print ticket format: Programmable as single line or multi-line.Input/Output: Up to 4 programmable inputs (12-28VDC) for zero, tare, clear, hold, peak, print, etc., up to 5 relay outputs for weight set points or fieldbus control.RS-232C: 1200 to 115200 baud, programmable. Continuous, Printer, BSIRS-485: 1200 to 115200 baud, programmable. Up to 31 units on the busModbus RTU: 1200 to 115200 baud, programmable, up to 31 units on the RS-485 bus.Ethernet TCP or Modbus TCP: 10 Mbit/s (half duplex), galvanically isolated.PROFIBUS: PROFIBUS DP V1. 9.6 kbit/s to 12 Mbit/s automatic baud rate detection.PROFINET: 100 Mbit/s (full duplex), galvanically isolated.CANopen: 10 kbit/s to 1 Mbit/s automatic baud rate detection.Analogue: Configurable to 4 – 20 mA, 0 – 20 mA, 0 – 5 VDC or 0 – 10 VDC. |
(Due to PT’s policy of continuous development, specifications and products offered are subject to change without notice.)
