INTEGRATION
|
 FEATURES
|
| SPECIFICATIONS | |
| Power Supply: 11-28VDC max., 300mA.Non-linearity: <0.0015% FSOTemperature Coefficient: <2 ppm/ºCLoad Cell Excitation: 5V, 86mA max. (up to 6x 350Ω or 12x 700Ω load cells, 4 or 6 wire)Input range: 0mV to +18mV (weighing).-18mV to +18mV (bidirectional force) Minimum 0.1 μV/divisionZero Adjustment Range: -18mV to +18mVSpan Adjustment Range: 0.2mV/V to 3.6mV/V input for full outputConversion Rate: Up to 800 times per secondResolution: Max. 100000, internal 8000000, 24 bit Delta Sigma ADCAnnunciators: Centre, zero, ErrOperating Environment: -10ºC to +40ºC; max. 85% RH, non-condensingEnclosure and Dimensions: Polyamide, DIN-rail mount, Front Width:22.5(MB,AD) or 45mm x Height: 99mm, Depth:114.5mm, weight 0.45kgMounting: DIN rail 35 mm x 7.5 mm, DIN 46277-3 | Calibration: Span calibration with weights by RS-232, fieldbus or AzCom software.vCal for calibration by direct entry of load cell characteristics with AzCom software.In count mode all instruments are factory calibrated for on site calibration in the PLC.Weighing Functions: Tare, zero, auto zero tracking, motion detection, auto-zero at power-up.Digital Filter: Adaptable filter adjustable in 10 steps.RS-232C: 9600 baud, 8N1. Continuous, Command, BSIRS-485: 1200 to 57600 baud, programmable. Up to 31 units on the busModbus RTU: 1200 to 57600 baud, programmable, up to 31 units on the RS-485 bus.Modbus TCP (on Ethernet): 10 Mbit/s (half duplex), galvanically isolated.PROFIBUS: PROFIBUS DP V1. 9.6 kbit/s to 12 Mbit/s automatic baud rate detection.PROFINET: 100 Mbit/s (full duplex), galvanically isolated.CANopen: 10 kbit/s to 1 Mbit/s automatic baud rate detection. |
